Third Millennium Systems Ltd. © 2024 All rights reserved. All trademarks are the property of their respective owners. 3123C
‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV3’ are trademarks of NXP B.V.
‘LEGIC advant’ is a trademark of LEGIC Identsystems
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc.,
and any use of such marks by Third Millennium Systems Ltd., is under licence.
IMPORTANT
We configure our readers to your specific needs.
Call to discuss your custom configuration or LEGIC® reader requirements.
Usually RX series readers and RX switches are
installed at the building turnstiles. The various
tenant card technologies are filtered and then
sent to the corresponding tenant access control
system.
Please be aware the tenant is responsible for managing who may enter
the building on their behalf.
NOTE:
The RXswitch may be ‘stacked’ to offer up to 4 multiples of 4 tenants (or
zones) within a building.
Download the datasheet which shows the wiring setup to accommodate
up to 16 tenants, or zones.
The RXswitch is not an RFID reader, but an electronic unit designed to work
seamlessly with the RX series of advanced access control readers. The switch unit
will separate multiple card technologies into individual data feeds, for
independent access control systems within a multi-tenanted environment.
product overview
contact us
+44 (0) 1495 751 992
switch to
supported technologies
3123C
Third Millennium Systems Ltd.
© 2024 All rights reserved.
All trademarks are the property of their respective owners.
‘MIFARE’, ‘MIFARE Classic’ and ‘MIFARE DESFire EV3’ are trademarks of NXP B.V.
‘LEGIC advant’ is a trademark of LEGIC Identsystems
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc.,
and any use of such marks by Third Millennium Systems Ltd., is under licence.
product overview
IMPORTANT
We configure our readers to your specific needs.
Call to discuss your custom configuration or LEGIC®
reader requirements.
The RXswitch is not an
RFID reader, but an
electronic unit designed
to work seamlessly with
the RX series of advanced
access control readers. The switch unit will
separate multiple card technologies into
individual data feeds, for independent access
control systems within a multi-tenanted
environment.
Usually RX series
readers and RX switches
are installed at the
building turnstiles. The
various tenant card
technologies are filtered
and then sent to the
corresponding tenant
access control system.
Please be aware the
tenant is responsible for
managing who may enter the building on their behalf.
NOTE:
The RXswitch may be ‘stacked’ to offer up to 4
multiples of 4 tenants (or zones) within a building.
Download the datasheet which shows the wiring setup
to accommodate up to 16 tenants, or zones.
contact us
+44 (0) 1495 751 992
switch to
supported technologies
